Hallo,
ich wollte heute meinen Monopiece Maker Ultimate (Wanhao D6 Klon) mit Marlin 2.08 flashen und bekomme leider beim kompilieren immer wieder den gleichen Fehler.![Sad]( "Sad")
Ich habe die Kompilierung mit Arduino IDE (1.8.13) vorgenommen und auch schon diverse u8glib libraries installiert und getestet (jeweils einzeln). Weiterhin habe ich auch versuche mit Arduino IDE 1.6.13 gemacht mit dem selben Ergebnis. Die Marlin Version 1.1.7 lies sich problemlos kompilieren. Leider habe ich nicht viel Ahnung von Firmware bzw. programmieren, sodass ich nicht mehr weiter weis.
Arduino: 1.8.13 (Windows 10), Board: "Arduino Mega or Mega 2560, ATmega2560 (Mega 2560)"
In file included from sketch\src\lcd\dogm/marlinui_DOGM.h:31:0,
from sketch\src\lcd\marlinui.cpp:126:
sketch\src\lcd\dogm/HAL_LCD_class_defines.h: In member function 'void U8GLIB_64128N_2X_HAL::init(pin_t, pin_t, pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm/HAL_LCD_class_defines.h:37:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7565_64128n_HAL_2x_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset);
^~~~
sketch\src\lcd\dogm/HAL_LCD_class_defines.h: In member function 'void U8GLIB_64128N_2X_HAL::init(pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm/HAL_LCD_class_defines.h:40:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7565_64128n_HAL_2x_hw_spi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset);
^~~~
sketch\src\lcd\dogm/HAL_LCD_class_defines.h: In member function 'void U8GLIB_ST7920_128X64_4X_HAL::init(pin_t, pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm/HAL_LCD_class_defines.h:53:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7920_128x64_HAL_4x_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, U8G_PIN_NONE, (uint8_t)reset); // a0 = U8G_PIN_NONE
^~~~
sketch\src\lcd\dogm/HAL_LCD_class_defines.h: In member function 'void U8GLIB_ST7920_128X64_4X_HAL::init(pin_t, pin_t)':
sketch\src\lcd\dogm/HAL_LCD_class_defines.h:56:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7920_128x64_HAL_4x_hw_spi, (uint8_t)cs, U8G_PIN_NONE, (uint8_t)reset); // a0 = U8G_PIN_NONE
^~~~
sketch\src\lcd\dogm/HAL_LCD_class_defines.h: In member function 'void U8GLIB_ST7920_128X64_RRD::init(pin_t, pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm/HAL_LCD_class_defines.h:71:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7920_128x64_rrd_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, U8G_PIN_NONE, (uint8_t)reset); // a0 = U8G_PIN_NONE
^~~~
sketch\src\lcd\dogm/HAL_LCD_class_defines.h: In member function 'void U8GLIB_SH1106_128X64_2X_I2C_2_WIRE::init(uint8_t)':
sketch\src\lcd\dogm/HAL_LCD_class_defines.h:81:59: error: 'init' is not a member of 'U8GLIB'
void init(uint8_t options = U8G_I2C_OPT_NONE) { U8GLIB::init(&u8g_dev_sh1106_128x64_2x_i2c_2_wire, options); }
^~~~
sketch\src\lcd\dogm/HAL_LCD_class_defines.h: In member function 'void U8GLIB_SSD1306_128X64_2X_I2C_2_WIRE::init(uint8_t)':
sketch\src\lcd\dogm/HAL_LCD_class_defines.h:90:59: error: 'init' is not a member of 'U8GLIB'
void init(uint8_t options = U8G_I2C_OPT_NONE) { U8GLIB::init(&u8g_dev_ssd1306_128x64_2x_i2c_2_wire, options); }
^~~~
sketch\src\lcd\dogm/HAL_LCD_class_defines.h: In member function 'void U8GLIB_TFT_320X240_UPSCALE_FROM_128X64::init(uint8_t, uint8_t, uint8_t)':
sketch\src\lcd\dogm/HAL_LCD_class_defines.h:103:77: error: 'init' is not a member of 'U8GLIB'
void init(uint8_t cs, uint8_t rs, uint8_t reset = U8G_PIN_NONE) { U8GLIB::init(&u8g_dev_tft_320x240_upscale_from_128x64, cs, rs, reset); }
^~~~
sketch\src\lcd\dogm/HAL_LCD_class_defines.h: In member function 'void U8GLIB_MINI12864_2X_HAL::init(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
sketch\src\lcd\dogm/HAL_LCD_class_defines.h:115:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_uc1701_mini12864_HAL_2x_sw_spi, sck, mosi, cs, a0, reset);
^~~~
sketch\src\lcd\dogm/HAL_LCD_class_defines.h: In member function 'void U8GLIB_MINI12864_2X_HAL::init(uint8_t, uint8_t, uint8_t)':
sketch\src\lcd\dogm/HAL_LCD_class_defines.h:118:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_uc1701_mini12864_HAL_2x_hw_spi, cs, a0, reset);
^~~~
sketch\src\lcd\dogm/HAL_LCD_class_defines.h: In member function 'void U8GLIB_SSD1309_128X64_HAL::init(pin_t, pin_t, pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm/HAL_LCD_class_defines.h:131:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_ssd1309_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset);
^~~~
sketch\src\lcd\dogm/HAL_LCD_class_defines.h: In member function 'void U8GLIB_SSD1309_128X64_HAL::init(pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm/HAL_LCD_class_defines.h:134:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_ssd1309_hw_spi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset);
^~~~
In file included from sketch\src\lcd\dogm\marlinui_DOGM.h:31:0,
from sketch\src\lcd\dogm\lcdprint_u8g.cpp:14:
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_64128N_2X_HAL::init(pin_t, pin_t, pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:37:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7565_64128n_HAL_2x_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset);
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_64128N_2X_HAL::init(pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:40:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7565_64128n_HAL_2x_hw_spi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset);
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_ST7920_128X64_4X_HAL::init(pin_t, pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:53:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7920_128x64_HAL_4x_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, U8G_PIN_NONE, (uint8_t)reset); // a0 = U8G_PIN_NONE
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_ST7920_128X64_4X_HAL::init(pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:56:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7920_128x64_HAL_4x_hw_spi, (uint8_t)cs, U8G_PIN_NONE, (uint8_t)reset); // a0 = U8G_PIN_NONE
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_ST7920_128X64_RRD::init(pin_t, pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:71:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7920_128x64_rrd_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, U8G_PIN_NONE, (uint8_t)reset); // a0 = U8G_PIN_NONE
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_SH1106_128X64_2X_I2C_2_WIRE::init(uint8_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:81:59: error: 'init' is not a member of 'U8GLIB'
void init(uint8_t options = U8G_I2C_OPT_NONE) { U8GLIB::init(&u8g_dev_sh1106_128x64_2x_i2c_2_wire, options); }
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_SSD1306_128X64_2X_I2C_2_WIRE::init(uint8_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:90:59: error: 'init' is not a member of 'U8GLIB'
void init(uint8_t options = U8G_I2C_OPT_NONE) { U8GLIB::init(&u8g_dev_ssd1306_128x64_2x_i2c_2_wire, options); }
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_TFT_320X240_UPSCALE_FROM_128X64::init(uint8_t, uint8_t, uint8_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:103:77: error: 'init' is not a member of 'U8GLIB'
void init(uint8_t cs, uint8_t rs, uint8_t reset = U8G_PIN_NONE) { U8GLIB::init(&u8g_dev_tft_320x240_upscale_from_128x64, cs, rs, reset); }
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_MINI12864_2X_HAL::init(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:115:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_uc1701_mini12864_HAL_2x_sw_spi, sck, mosi, cs, a0, reset);
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_MINI12864_2X_HAL::init(uint8_t, uint8_t, uint8_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:118:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_uc1701_mini12864_HAL_2x_hw_spi, cs, a0, reset);
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_SSD1309_128X64_HAL::init(pin_t, pin_t, pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:131:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_ssd1309_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset);
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_SSD1309_128X64_HAL::init(pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:134:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_ssd1309_hw_spi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset);
^~~~
In file included from sketch\src\lcd\dogm\marlinui_DOGM.h:31:0,
from sketch\src\lcd\dogm\marlinui_DOGM.cpp:42:
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_64128N_2X_HAL::init(pin_t, pin_t, pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:37:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7565_64128n_HAL_2x_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset);
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_64128N_2X_HAL::init(pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:40:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7565_64128n_HAL_2x_hw_spi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset);
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_ST7920_128X64_4X_HAL::init(pin_t, pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:53:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7920_128x64_HAL_4x_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, U8G_PIN_NONE, (uint8_t)reset); // a0 = U8G_PIN_NONE
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_ST7920_128X64_4X_HAL::init(pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:56:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7920_128x64_HAL_4x_hw_spi, (uint8_t)cs, U8G_PIN_NONE, (uint8_t)reset); // a0 = U8G_PIN_NONE
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_ST7920_128X64_RRD::init(pin_t, pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:71:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7920_128x64_rrd_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, U8G_PIN_NONE, (uint8_t)reset); // a0 = U8G_PIN_NONE
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_SH1106_128X64_2X_I2C_2_WIRE::init(uint8_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:81:59: error: 'init' is not a member of 'U8GLIB'
void init(uint8_t options = U8G_I2C_OPT_NONE) { U8GLIB::init(&u8g_dev_sh1106_128x64_2x_i2c_2_wire, options); }
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_SSD1306_128X64_2X_I2C_2_WIRE::init(uint8_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:90:59: error: 'init' is not a member of 'U8GLIB'
void init(uint8_t options = U8G_I2C_OPT_NONE) { U8GLIB::init(&u8g_dev_ssd1306_128x64_2x_i2c_2_wire, options); }
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_TFT_320X240_UPSCALE_FROM_128X64::init(uint8_t, uint8_t, uint8_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:103:77: error: 'init' is not a member of 'U8GLIB'
void init(uint8_t cs, uint8_t rs, uint8_t reset = U8G_PIN_NONE) { U8GLIB::init(&u8g_dev_tft_320x240_upscale_from_128x64, cs, rs, reset); }
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_MINI12864_2X_HAL::init(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:115:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_uc1701_mini12864_HAL_2x_sw_spi, sck, mosi, cs, a0, reset);
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_MINI12864_2X_HAL::init(uint8_t, uint8_t, uint8_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:118:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_uc1701_mini12864_HAL_2x_hw_spi, cs, a0, reset);
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_SSD1309_128X64_HAL::init(pin_t, pin_t, pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:131:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_ssd1309_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset);
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_SSD1309_128X64_HAL::init(pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:134:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_ssd1309_hw_spi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset);
^~~~
sketch\src\lcd\dogm\marlinui_DOGM.cpp: In static member function 'static void MarlinUI::init_lcd()':
sketch\src\lcd\dogm\marlinui_DOGM.cpp:262:9: error: 'class U8GLIB_SSD1306_128X64_2X' has no member named 'init'
u8g.init(U8G_PARAM);
^~~~
In file included from sketch\src\lcd\dogm\marlinui_DOGM.h:31:0,
from sketch\src\lcd\dogm\dogm_Statusscreen.h:32,
from sketch\src\lcd\dogm\status_screen_DOGM.cpp:32:
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_64128N_2X_HAL::init(pin_t, pin_t, pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:37:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7565_64128n_HAL_2x_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset);
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_64128N_2X_HAL::init(pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:40:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7565_64128n_HAL_2x_hw_spi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset);
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_ST7920_128X64_4X_HAL::init(pin_t, pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:53:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7920_128x64_HAL_4x_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, U8G_PIN_NONE, (uint8_t)reset); // a0 = U8G_PIN_NONE
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_ST7920_128X64_4X_HAL::init(pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:56:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7920_128x64_HAL_4x_hw_spi, (uint8_t)cs, U8G_PIN_NONE, (uint8_t)reset); // a0 = U8G_PIN_NONE
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_ST7920_128X64_RRD::init(pin_t, pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:71:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7920_128x64_rrd_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, U8G_PIN_NONE, (uint8_t)reset); // a0 = U8G_PIN_NONE
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_SH1106_128X64_2X_I2C_2_WIRE::init(uint8_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:81:59: error: 'init' is not a member of 'U8GLIB'
void init(uint8_t options = U8G_I2C_OPT_NONE) { U8GLIB::init(&u8g_dev_sh1106_128x64_2x_i2c_2_wire, options); }
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_SSD1306_128X64_2X_I2C_2_WIRE::init(uint8_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:90:59: error: 'init' is not a member of 'U8GLIB'
void init(uint8_t options = U8G_I2C_OPT_NONE) { U8GLIB::init(&u8g_dev_ssd1306_128x64_2x_i2c_2_wire, options); }
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_TFT_320X240_UPSCALE_FROM_128X64::init(uint8_t, uint8_t, uint8_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:103:77: error: 'init' is not a member of 'U8GLIB'
void init(uint8_t cs, uint8_t rs, uint8_t reset = U8G_PIN_NONE) { U8GLIB::init(&u8g_dev_tft_320x240_upscale_from_128x64, cs, rs, reset); }
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_MINI12864_2X_HAL::init(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:115:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_uc1701_mini12864_HAL_2x_sw_spi, sck, mosi, cs, a0, reset);
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_MINI12864_2X_HAL::init(uint8_t, uint8_t, uint8_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:118:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_uc1701_mini12864_HAL_2x_hw_spi, cs, a0, reset);
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_SSD1309_128X64_HAL::init(pin_t, pin_t, pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:131:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_ssd1309_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset);
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_SSD1309_128X64_HAL::init(pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:134:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_ssd1309_hw_spi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset);
^~~~
exit status 1
Fehler beim Kompilieren für das Board Arduino Mega or Mega 2560.
Dieser Bericht wäre detaillierter, wenn die Option
"Ausführliche Ausgabe während der Kompilierung"
in Datei -> Voreinstellungen aktiviert wäre.
Wäre cool wenn mir jemand helfen könnte.
Viele Grüße
Das Enzym.
ich wollte heute meinen Monopiece Maker Ultimate (Wanhao D6 Klon) mit Marlin 2.08 flashen und bekomme leider beim kompilieren immer wieder den gleichen Fehler.
Ich habe die Kompilierung mit Arduino IDE (1.8.13) vorgenommen und auch schon diverse u8glib libraries installiert und getestet (jeweils einzeln). Weiterhin habe ich auch versuche mit Arduino IDE 1.6.13 gemacht mit dem selben Ergebnis. Die Marlin Version 1.1.7 lies sich problemlos kompilieren. Leider habe ich nicht viel Ahnung von Firmware bzw. programmieren, sodass ich nicht mehr weiter weis.Show ContentFehlercode:
Arduino: 1.8.13 (Windows 10), Board: "Arduino Mega or Mega 2560, ATmega2560 (Mega 2560)"
In file included from sketch\src\lcd\dogm/marlinui_DOGM.h:31:0,
from sketch\src\lcd\marlinui.cpp:126:
sketch\src\lcd\dogm/HAL_LCD_class_defines.h: In member function 'void U8GLIB_64128N_2X_HAL::init(pin_t, pin_t, pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm/HAL_LCD_class_defines.h:37:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7565_64128n_HAL_2x_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset);
^~~~
sketch\src\lcd\dogm/HAL_LCD_class_defines.h: In member function 'void U8GLIB_64128N_2X_HAL::init(pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm/HAL_LCD_class_defines.h:40:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7565_64128n_HAL_2x_hw_spi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset);
^~~~
sketch\src\lcd\dogm/HAL_LCD_class_defines.h: In member function 'void U8GLIB_ST7920_128X64_4X_HAL::init(pin_t, pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm/HAL_LCD_class_defines.h:53:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7920_128x64_HAL_4x_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, U8G_PIN_NONE, (uint8_t)reset); // a0 = U8G_PIN_NONE
^~~~
sketch\src\lcd\dogm/HAL_LCD_class_defines.h: In member function 'void U8GLIB_ST7920_128X64_4X_HAL::init(pin_t, pin_t)':
sketch\src\lcd\dogm/HAL_LCD_class_defines.h:56:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7920_128x64_HAL_4x_hw_spi, (uint8_t)cs, U8G_PIN_NONE, (uint8_t)reset); // a0 = U8G_PIN_NONE
^~~~
sketch\src\lcd\dogm/HAL_LCD_class_defines.h: In member function 'void U8GLIB_ST7920_128X64_RRD::init(pin_t, pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm/HAL_LCD_class_defines.h:71:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7920_128x64_rrd_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, U8G_PIN_NONE, (uint8_t)reset); // a0 = U8G_PIN_NONE
^~~~
sketch\src\lcd\dogm/HAL_LCD_class_defines.h: In member function 'void U8GLIB_SH1106_128X64_2X_I2C_2_WIRE::init(uint8_t)':
sketch\src\lcd\dogm/HAL_LCD_class_defines.h:81:59: error: 'init' is not a member of 'U8GLIB'
void init(uint8_t options = U8G_I2C_OPT_NONE) { U8GLIB::init(&u8g_dev_sh1106_128x64_2x_i2c_2_wire, options); }
^~~~
sketch\src\lcd\dogm/HAL_LCD_class_defines.h: In member function 'void U8GLIB_SSD1306_128X64_2X_I2C_2_WIRE::init(uint8_t)':
sketch\src\lcd\dogm/HAL_LCD_class_defines.h:90:59: error: 'init' is not a member of 'U8GLIB'
void init(uint8_t options = U8G_I2C_OPT_NONE) { U8GLIB::init(&u8g_dev_ssd1306_128x64_2x_i2c_2_wire, options); }
^~~~
sketch\src\lcd\dogm/HAL_LCD_class_defines.h: In member function 'void U8GLIB_TFT_320X240_UPSCALE_FROM_128X64::init(uint8_t, uint8_t, uint8_t)':
sketch\src\lcd\dogm/HAL_LCD_class_defines.h:103:77: error: 'init' is not a member of 'U8GLIB'
void init(uint8_t cs, uint8_t rs, uint8_t reset = U8G_PIN_NONE) { U8GLIB::init(&u8g_dev_tft_320x240_upscale_from_128x64, cs, rs, reset); }
^~~~
sketch\src\lcd\dogm/HAL_LCD_class_defines.h: In member function 'void U8GLIB_MINI12864_2X_HAL::init(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
sketch\src\lcd\dogm/HAL_LCD_class_defines.h:115:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_uc1701_mini12864_HAL_2x_sw_spi, sck, mosi, cs, a0, reset);
^~~~
sketch\src\lcd\dogm/HAL_LCD_class_defines.h: In member function 'void U8GLIB_MINI12864_2X_HAL::init(uint8_t, uint8_t, uint8_t)':
sketch\src\lcd\dogm/HAL_LCD_class_defines.h:118:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_uc1701_mini12864_HAL_2x_hw_spi, cs, a0, reset);
^~~~
sketch\src\lcd\dogm/HAL_LCD_class_defines.h: In member function 'void U8GLIB_SSD1309_128X64_HAL::init(pin_t, pin_t, pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm/HAL_LCD_class_defines.h:131:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_ssd1309_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset);
^~~~
sketch\src\lcd\dogm/HAL_LCD_class_defines.h: In member function 'void U8GLIB_SSD1309_128X64_HAL::init(pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm/HAL_LCD_class_defines.h:134:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_ssd1309_hw_spi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset);
^~~~
In file included from sketch\src\lcd\dogm\marlinui_DOGM.h:31:0,
from sketch\src\lcd\dogm\lcdprint_u8g.cpp:14:
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_64128N_2X_HAL::init(pin_t, pin_t, pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:37:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7565_64128n_HAL_2x_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset);
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_64128N_2X_HAL::init(pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:40:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7565_64128n_HAL_2x_hw_spi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset);
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_ST7920_128X64_4X_HAL::init(pin_t, pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:53:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7920_128x64_HAL_4x_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, U8G_PIN_NONE, (uint8_t)reset); // a0 = U8G_PIN_NONE
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_ST7920_128X64_4X_HAL::init(pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:56:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7920_128x64_HAL_4x_hw_spi, (uint8_t)cs, U8G_PIN_NONE, (uint8_t)reset); // a0 = U8G_PIN_NONE
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_ST7920_128X64_RRD::init(pin_t, pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:71:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7920_128x64_rrd_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, U8G_PIN_NONE, (uint8_t)reset); // a0 = U8G_PIN_NONE
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_SH1106_128X64_2X_I2C_2_WIRE::init(uint8_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:81:59: error: 'init' is not a member of 'U8GLIB'
void init(uint8_t options = U8G_I2C_OPT_NONE) { U8GLIB::init(&u8g_dev_sh1106_128x64_2x_i2c_2_wire, options); }
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_SSD1306_128X64_2X_I2C_2_WIRE::init(uint8_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:90:59: error: 'init' is not a member of 'U8GLIB'
void init(uint8_t options = U8G_I2C_OPT_NONE) { U8GLIB::init(&u8g_dev_ssd1306_128x64_2x_i2c_2_wire, options); }
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_TFT_320X240_UPSCALE_FROM_128X64::init(uint8_t, uint8_t, uint8_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:103:77: error: 'init' is not a member of 'U8GLIB'
void init(uint8_t cs, uint8_t rs, uint8_t reset = U8G_PIN_NONE) { U8GLIB::init(&u8g_dev_tft_320x240_upscale_from_128x64, cs, rs, reset); }
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_MINI12864_2X_HAL::init(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:115:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_uc1701_mini12864_HAL_2x_sw_spi, sck, mosi, cs, a0, reset);
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_MINI12864_2X_HAL::init(uint8_t, uint8_t, uint8_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:118:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_uc1701_mini12864_HAL_2x_hw_spi, cs, a0, reset);
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_SSD1309_128X64_HAL::init(pin_t, pin_t, pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:131:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_ssd1309_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset);
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_SSD1309_128X64_HAL::init(pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:134:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_ssd1309_hw_spi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset);
^~~~
In file included from sketch\src\lcd\dogm\marlinui_DOGM.h:31:0,
from sketch\src\lcd\dogm\marlinui_DOGM.cpp:42:
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_64128N_2X_HAL::init(pin_t, pin_t, pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:37:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7565_64128n_HAL_2x_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset);
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_64128N_2X_HAL::init(pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:40:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7565_64128n_HAL_2x_hw_spi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset);
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_ST7920_128X64_4X_HAL::init(pin_t, pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:53:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7920_128x64_HAL_4x_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, U8G_PIN_NONE, (uint8_t)reset); // a0 = U8G_PIN_NONE
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_ST7920_128X64_4X_HAL::init(pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:56:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7920_128x64_HAL_4x_hw_spi, (uint8_t)cs, U8G_PIN_NONE, (uint8_t)reset); // a0 = U8G_PIN_NONE
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_ST7920_128X64_RRD::init(pin_t, pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:71:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7920_128x64_rrd_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, U8G_PIN_NONE, (uint8_t)reset); // a0 = U8G_PIN_NONE
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_SH1106_128X64_2X_I2C_2_WIRE::init(uint8_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:81:59: error: 'init' is not a member of 'U8GLIB'
void init(uint8_t options = U8G_I2C_OPT_NONE) { U8GLIB::init(&u8g_dev_sh1106_128x64_2x_i2c_2_wire, options); }
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_SSD1306_128X64_2X_I2C_2_WIRE::init(uint8_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:90:59: error: 'init' is not a member of 'U8GLIB'
void init(uint8_t options = U8G_I2C_OPT_NONE) { U8GLIB::init(&u8g_dev_ssd1306_128x64_2x_i2c_2_wire, options); }
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_TFT_320X240_UPSCALE_FROM_128X64::init(uint8_t, uint8_t, uint8_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:103:77: error: 'init' is not a member of 'U8GLIB'
void init(uint8_t cs, uint8_t rs, uint8_t reset = U8G_PIN_NONE) { U8GLIB::init(&u8g_dev_tft_320x240_upscale_from_128x64, cs, rs, reset); }
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_MINI12864_2X_HAL::init(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:115:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_uc1701_mini12864_HAL_2x_sw_spi, sck, mosi, cs, a0, reset);
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_MINI12864_2X_HAL::init(uint8_t, uint8_t, uint8_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:118:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_uc1701_mini12864_HAL_2x_hw_spi, cs, a0, reset);
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_SSD1309_128X64_HAL::init(pin_t, pin_t, pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:131:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_ssd1309_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset);
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_SSD1309_128X64_HAL::init(pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:134:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_ssd1309_hw_spi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset);
^~~~
sketch\src\lcd\dogm\marlinui_DOGM.cpp: In static member function 'static void MarlinUI::init_lcd()':
sketch\src\lcd\dogm\marlinui_DOGM.cpp:262:9: error: 'class U8GLIB_SSD1306_128X64_2X' has no member named 'init'
u8g.init(U8G_PARAM);
^~~~
In file included from sketch\src\lcd\dogm\marlinui_DOGM.h:31:0,
from sketch\src\lcd\dogm\dogm_Statusscreen.h:32,
from sketch\src\lcd\dogm\status_screen_DOGM.cpp:32:
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_64128N_2X_HAL::init(pin_t, pin_t, pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:37:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7565_64128n_HAL_2x_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset);
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_64128N_2X_HAL::init(pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:40:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7565_64128n_HAL_2x_hw_spi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset);
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_ST7920_128X64_4X_HAL::init(pin_t, pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:53:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7920_128x64_HAL_4x_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, U8G_PIN_NONE, (uint8_t)reset); // a0 = U8G_PIN_NONE
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_ST7920_128X64_4X_HAL::init(pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:56:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7920_128x64_HAL_4x_hw_spi, (uint8_t)cs, U8G_PIN_NONE, (uint8_t)reset); // a0 = U8G_PIN_NONE
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_ST7920_128X64_RRD::init(pin_t, pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:71:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_st7920_128x64_rrd_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, U8G_PIN_NONE, (uint8_t)reset); // a0 = U8G_PIN_NONE
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_SH1106_128X64_2X_I2C_2_WIRE::init(uint8_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:81:59: error: 'init' is not a member of 'U8GLIB'
void init(uint8_t options = U8G_I2C_OPT_NONE) { U8GLIB::init(&u8g_dev_sh1106_128x64_2x_i2c_2_wire, options); }
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_SSD1306_128X64_2X_I2C_2_WIRE::init(uint8_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:90:59: error: 'init' is not a member of 'U8GLIB'
void init(uint8_t options = U8G_I2C_OPT_NONE) { U8GLIB::init(&u8g_dev_ssd1306_128x64_2x_i2c_2_wire, options); }
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_TFT_320X240_UPSCALE_FROM_128X64::init(uint8_t, uint8_t, uint8_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:103:77: error: 'init' is not a member of 'U8GLIB'
void init(uint8_t cs, uint8_t rs, uint8_t reset = U8G_PIN_NONE) { U8GLIB::init(&u8g_dev_tft_320x240_upscale_from_128x64, cs, rs, reset); }
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_MINI12864_2X_HAL::init(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:115:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_uc1701_mini12864_HAL_2x_sw_spi, sck, mosi, cs, a0, reset);
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_MINI12864_2X_HAL::init(uint8_t, uint8_t, uint8_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:118:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_uc1701_mini12864_HAL_2x_hw_spi, cs, a0, reset);
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_SSD1309_128X64_HAL::init(pin_t, pin_t, pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:131:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_ssd1309_sw_spi, (uint8_t)sck, (uint8_t)mosi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset);
^~~~
sketch\src\lcd\dogm\HAL_LCD_class_defines.h: In member function 'void U8GLIB_SSD1309_128X64_HAL::init(pin_t, pin_t, pin_t)':
sketch\src\lcd\dogm\HAL_LCD_class_defines.h:134:13: error: 'init' is not a member of 'U8GLIB'
U8GLIB::init(&u8g_dev_ssd1309_hw_spi, (uint8_t)cs, (uint8_t)a0, (uint8_t)reset);
^~~~
exit status 1
Fehler beim Kompilieren für das Board Arduino Mega or Mega 2560.
Dieser Bericht wäre detaillierter, wenn die Option
"Ausführliche Ausgabe während der Kompilierung"
in Datei -> Voreinstellungen aktiviert wäre.
Wäre cool wenn mir jemand helfen könnte.
Viele Grüße
Das Enzym.
